CLASS 105 MOLD SPECIFICATIONS

MOLD MAKING

MOLD BASE

CAVITY AND CORES

COOLING

EJECTION

CLASS 105 MOLD SPECIFICATIONS

Cycles: Not exceeding 500

Description: Protoype only. This mold will be constructed in the least expensive manner possible
to produce a very limited quantity of prototype parts.

GENERAL INFORMATION

Mold is for prototype purpose only. Lifetime cycles are not expected to exceed 500.

Approved shrink factors for the selected plastic molding material shall be supplied by Tooling Engineer.

Engineering shall supply documentation for part dimensions.

Mold design is not required. Tooling Engineer may request preliminary mold construction report.

MOLD BASE

Mold base may be of mild steel material or aluminum.

Eye bolt holes shall be located per request of Tooling Engineer.

Mold base shall have clamp slots located perrequest of Tooling Engineer.

CAVITY AND CORES

Cores and cavities details may be cut directly into mold base material.

All molding surfaces can be of mild steel, aluminum, or cast material as approved by Tooling Engineer.

Part undercuts may be formed with hand loaded inserts or may be formed as a manual secondary operation.

COOLING

Water lines, if required, shall be located per request of Tooling Engineer.

EJECTION

Ejector plate and ejector pins can be used or part may be manually removed from the mold.